gitea/docs/content/doc/advanced/config-cheat-sheet.en-us.md

date	title	slug	weight	toc	draft	menu
2016-12-26T16:00:00+02:00	Config Cheat Sheet	config-cheat-sheet	20	false	false	sidebar parent name weight identifier advanced Config Cheat Sheet 20 config-cheat-sheet

Configuration Cheat Sheet

This is a cheat sheet for the Gitea configuration file. It contains most of the settings that can be configured as well as their default values.

Any changes to the Gitea configuration file should be made in custom/conf/app.ini or any corresponding location. When installing from a distribution, this will typically be found at /etc/gitea/conf/app.ini.

The defaults provided here are best-effort (not built automatically). They are accurately recorded in app.example.ini (s/main/<tag|release>). Any string in the format %(X)s is a feature powered by ini, for reading values recursively.

In the default values below, a value in the form $XYZ refers to an environment variable. (However, see environment-to-ini.) Values in the form XxYyZz refer to values listed as part of the default configuration. These notation forms will not work in your own app.ini file and are only listed here as documentation.

Values containing # or ; must be quoted using ` or """.

Note: A full restart is required for Gitea configuration changes to take effect.

{{< toc >}}

Default Configuration (non-app.ini configuration)

These values are environment-dependent but form the basis of a lot of values. They will be reported as part of the default configuration when running gitea --help or on start-up. The order they are emitted there is slightly different but we will list them here in the order they are set-up.

• AppPath: This is the absolute path of the running gitea binary.
• AppWorkPath: This refers to "working path" of the gitea binary. It is determined by using the first set thing in the following hierarchy:
  • The --work-path flag passed to the binary
  • The environment variable $GITEA_WORK_DIR
  • A built-in value set at build time (see building from source)
  • Otherwise it defaults to the directory of the AppPath
  • If any of the above are relative paths then they are made absolute against the the directory of the AppPath
• CustomPath: This is the base directory for custom templates and other options. It is determined by using the first set thing in the following hierarchy:
  • The --custom-path flag passed to the binary
  • The environment variable $GITEA_CUSTOM
  • A built-in value set at build time (see building from source)
  • Otherwise it defaults to AppWorkPath/custom
  • If any of the above are relative paths then they are made absolute against the the directory of the AppWorkPath
• CustomConf: This is the path to the app.ini file.
  • The --config flag passed to the binary
  • A built-in value set at build time (see building from source)
  • Otherwise it defaults to CustomPath/conf/app.ini
  • If any of the above are relative paths then they are made absolute against the the directory of the CustomPath

In addition there is StaticRootPath which can be set as a built-in at build time, but will otherwise default to AppWorkPath

Overall (DEFAULT)

• APP_NAME: Gitea: Git with a cup of tea: Application name, used in the page title.
• RUN_USER: current OS username/$USER/$USERNAME e.g. git: The user Gitea will run as. This should be a dedicated system (non-user) account. Setting this incorrectly will cause Gitea to not start.
• RUN_MODE: prod: Application run mode, affects performance and debugging. Either "dev", "prod" or "test".

Repository (repository)

• ROOT: %(APP_DATA_PATH)s/gitea-repositories: Root path for storing all repository data. A relative path is interpreted as AppWorkPath/%(ROOT)s.
• SCRIPT_TYPE: bash: The script type this server supports. Usually this is bash, but some users report that only sh is available.
• DETECTED_CHARSETS_ORDER: UTF-8, UTF-16BE, UTF-16LE, UTF-32BE, UTF-32LE, ISO-8859, windows-1252, ISO-8859, windows-1250, ISO-8859, ISO-8859, ISO-8859, windows-1253, ISO-8859, windows-1255, ISO-8859, windows-1251, windows-1256, KOI8-R, ISO-8859, windows-1254, Shift_JIS, GB18030, EUC-JP, EUC-KR, Big5, ISO-2022, ISO-2022, ISO-2022, IBM424_rtl, IBM424_ltr, IBM420_rtl, IBM420_ltr: Tie-break order of detected charsets - if the detected charsets have equal confidence, charsets earlier in the list will be chosen in preference to those later. Adding defaults will place the unnamed charsets at that point.
• ANSI_CHARSET: <empty>: Default ANSI charset to override non-UTF-8 charsets to.
• FORCE_PRIVATE: false: Force every new repository to be private.
• DEFAULT_PRIVATE: last: Default private when creating a new repository.

  [last, private, publi

• DEFAULT_PUSH_CREATE_PRIVATE: true: Default private when creating a new repository with push-to-create.
• MAX_CREATION_LIMIT: -1: Global maximum creation limit of repositories per user, -1 means no limit.
• PULL_REQUEST_QUEUE_LENGTH: 1000: Length of pull request patch test queue, make it. DEPRECATED use LENGTH in [queue.pr_patch_checker]. as large as possible. Use caution when editing this value.
• MIRROR_QUEUE_LENGTH: 1000: Patch test queue length, increase if pull request patch testing starts hanging. DEPRECATED use LENGTH in [queue.mirror].
• PREFERRED_LICENSES: Apache License 2.0,MIT License: Preferred Licenses to place at the top of the list. Name must match file name in options/license or custom/options/license.
• DISABLE_HTTP_GIT: false: Disable the ability to interact with repositories over the HTTP protocol.
• USE_COMPAT_SSH_URI: false: Force ssh:// clone url instead of scp-style uri when default SSH port is used.
• ACCESS_CONTROL_ALLOW_ORIGIN: <empty>: Value for Access-Control-Allow-Origin header, default is not to present. WARNING: This maybe harmful to you website if you do not give it a right value.
• DEFAULT_CLOSE_ISSUES_VIA_COMMITS_IN_ANY_BRANCH: false: Close an issue if a commit on a non default branch marks it as closed.
• ENABLE_PUSH_CREATE_USER: false: Allow users to push local repositories to Gitea and have them automatically created for a user.
• ENABLE_PUSH_CREATE_ORG: false: Allow users to push local repositories to Gitea and have them automatically created for an org.
• DISABLED_REPO_UNITS: empty: Comma separated list of globally disabled repo units. Allowed values: [repo.issues, repo.ext_issues, repo.pulls, repo.wiki, repo.ext_wiki, repo.projects]
• DEFAULT_REPO_UNITS: repo.code,repo.releases,repo.issues,repo.pulls,repo.wiki,repo.projects: Comma separated list of default repo units. Allowed values: [repo.code, repo.releases, repo.issues, repo.pulls, repo.wiki, repo.projects]. Note: Code and Releases can currently not be deactivated. If you specify default repo units you should still list them for future compatibility. External wiki and issue tracker can't be enabled by default as it requires additional settings. Disabled repo units will not be added to new repositories regardless if it is in the default list.
• PREFIX_ARCHIVE_FILES: true: Prefix archive files by placing them in a directory named after the repository.
• DISABLE_MIGRATIONS: false: Disable migrating feature.
• DISABLE_STARS: false: Disable stars feature.
• DEFAULT_BRANCH: main: Default branch name of all repositories.
• ALLOW_ADOPTION_OF_UNADOPTED_REPOSITORIES: false: Allow non-admin users to adopt unadopted repositories
• ALLOW_DELETION_OF_UNADOPTED_REPOSITORIES: false: Allow non-admin users to delete unadopted repositories
• DISABLE_DOWNLOAD_SOURCE_ARCHIVES: false: Don't allow download source archive files from UI
• ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT: true: Allow fork repositories without maximum number limit

Repository - Editor (repository.editor)

• LINE_WRAP_EXTENSIONS: .txt,.md,.markdown,.mdown,.mkd,: List of file extensions for which lines should be wrapped in the Monaco editor. Separate extensions with a comma. To line wrap files without an extension, just put a comma
• PREVIEWABLE_FILE_MODES: markdown: Valid file modes that have a preview API associated with them, such as api/v1/markdown. Separate the values by commas. The preview tab in edit mode won't be displayed if the file extension doesn't match.

Repository - Pull Request (repository.pull-request)

• WORK_IN_PROGRESS_PREFIXES: WIP:,[WIP]: List of prefixes used in Pull Request title to mark them as Work In Progress. These are matched in a case-insensitive manner.
• CLOSE_KEYWORDS: close, closes, closed, fix, fixes, fixed, resolve, resolves, resolved: List of keywords used in Pull Request comments to automatically close a related issue
• REOPEN_KEYWORDS: reopen, reopens, reopened: List of keywords used in Pull Request comments to automatically reopen a related issue
• DEFAULT_MERGE_STYLE: merge: Set default merge style for repository creating, valid options: merge, rebase, rebase-merge, squash
• DEFAULT_MERGE_MESSAGE_COMMITS_LIMIT: 50: In the default merge message for squash commits include at most this many commits. Set to -1 to include all commits
• DEFAULT_MERGE_MESSAGE_SIZE: 5120: In the default merge message for squash commits limit the size of the commit messages. Set to -1 to have no limit. Only used if POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES is true.
• DEFAULT_MERGE_MESSAGE_ALL_AUTHORS: false: In the default merge message for squash commits walk all commits to include all authors in the Co-authored-by otherwise just use those in the limited list
• DEFAULT_MERGE_MESSAGE_MAX_APPROVERS: 10: In default merge messages limit the number of approvers listed as Reviewed-by:. Set to -1 to include all.
• DEFAULT_MERGE_MESSAGE_OFFICIAL_APPROVERS_ONLY: true: In default merge messages only include approvers who are officially allowed to review.
• POPULATE_SQUASH_COMMENT_WITH_COMMIT_MESSAGES: false: In default squash-merge messages include the commit message of all commits comprising the pull request.
• ADD_CO_COMMITTER_TRAILERS: true: Add co-authored-by and co-committed-by trailers to merge commit messages if committer does not match author.
• TEST_CONFLICTING_PATCHES_WITH_GIT_APPLY: false: PR patches are tested using a three-way merge method to discover if there are conflicts. If this setting is set to true, conflicting patches will be retested using git apply - This was the previous behaviour in 1.18 (and earlier) but is somewhat inefficient. Please report if you find that this setting is required.

Repository - Issue (repository.issue)

• LOCK_REASONS: Too heated,Off-topic,Resolved,Spam: A list of reasons why a Pull Request or Issue can be locked

Repository - Upload (repository.upload)

• ENABLED: true: Whether repository file uploads are enabled
• TEMP_PATH: data/tmp/uploads: Path for uploads (content gets deleted on Gitea restart)
• ALLOWED_TYPES: <empty>: Comma-separated list of allowed file extensions (.zip), mime types (text/plain) or wildcard type (image/*, audio/*, video/*). Empty value or */* allows all types.
• FILE_MAX_SIZE: 3: Max size of each file in megabytes.
• MAX_FILES: 5: Max number of files per upload

Repository - Release (repository.release)

• ALLOWED_TYPES: <empty>: Comma-separated list of allowed file extensions (.zip), mime types (text/plain) or wildcard type (image/*, audio/*, video/*). Empty value or */* allows all types.
• DEFAULT_PAGING_NUM: 10: The default paging number of releases user interface
• For settings related to file attachments on releases, see the attachment section.

Repository - Signing (repository.signing)

• SIGNING_KEY: default: [none, KEYID, default ]: Key to sign with.
• SIGNING_NAME & SIGNING_EMAIL: if a KEYID is provided as the SIGNING_KEY, use these as the Name and Email address of the signer. These should match publicized name and email address for the key.
• INITIAL_COMMIT: always: [never, pubkey, twofa, always]: Sign initial commit.
  • never: Never sign
  • pubkey: Only sign if the user has a public key
  • twofa: Only sign if the user is logged in with twofa
  • always: Always sign
  • Options other than never and always can be combined as a comma separated list.
• DEFAULT_TRUST_MODEL: collaborator: [collaborator, committer, collaboratorcommitter]: The default trust model used for verifying commits.
  • collaborator: Trust signatures signed by keys of collaborators.
  • committer: Trust signatures that match committers (This matches GitHub and will force Gitea signed commits to have Gitea as the committer).
  • collaboratorcommitter: Trust signatures signed by keys of collaborators which match the committer.
• WIKI: never: [never, pubkey, twofa, always, parentsigned]: Sign commits to wiki.
• CRUD_ACTIONS: pubkey, twofa, parentsigned: [never, pubkey, twofa, parentsigned, always]: Sign CRUD actions.
  • Options as above, with the addition of:
  • parentsigned: Only sign if the parent commit is signed.
• MERGES: pubkey, twofa, basesigned, commitssigned: [never, pubkey, twofa, approved, basesigned, commitssigned, always]: Sign merges.
  • approved: Only sign approved merges to a protected branch.
  • basesigned: Only sign if the parent commit in the base repo is signed.
  • headsigned: Only sign if the head commit in the head branch is signed.
  • commitssigned: Only sign if all the commits in the head branch to the merge point are signed.

Repository - Local (repository.local)

• LOCAL_COPY_PATH: tmp/local-repo: Path for temporary local repository copies. Defaults to tmp/local-repo (content gets deleted on Gitea restart)

Repository - MIME type mapping (repository.mimetype_mapping)

Configuration for set the expected MIME type based on file extensions of downloadable files. Configuration presents in key-value pairs and file extensions starts with leading ..

The following configuration set Content-Type: application/vnd.android.package-archive header when downloading files with .apk file extension.

.apk=application/vnd.android.package-archive

CORS (cors)

• ENABLED: false: enable cors headers (disabled by default)
• SCHEME: http: scheme of allowed requests
• ALLOW_DOMAIN: *: list of requesting domains that are allowed
• ALLOW_SUBDOMAIN: false: allow subdomains of headers listed above to request
• METHODS: GET,HEAD,POST,PUT,PATCH,DELETE,OPTIONS: list of methods allowed to request
• MAX_AGE: 10m: max time to cache response
• ALLOW_CREDENTIALS: false: allow request with credentials
• HEADERS: Content-Type,User-Agent: additional headers that are permitted in requests
• X_FRAME_OPTIONS: SAMEORIGIN: Set the X-Frame-Options header value.

UI (ui)

• EXPLORE_PAGING_NUM: 20: Number of repositories that are shown in one explore page.
• ISSUE_PAGING_NUM: 20: Number of issues that are shown in one page (for all pages that list issues, milestones, projects).
• MEMBERS_PAGING_NUM: 20: Number of members that are shown in organization members.
• FEED_MAX_COMMIT_NUM: 5: Number of maximum commits shown in one activity feed.
• FEED_PAGING_NUM: 20: Number of items that are displayed in home feed.
• SITEMAP_PAGING_NUM: 20: Number of items that are displayed in a single subsitemap.
• GRAPH_MAX_COMMIT_NUM: 100: Number of maximum commits shown in the commit graph.
• CODE_COMMENT_LINES: 4: Number of line of codes shown for a code comment.
• DEFAULT_THEME: auto: [auto, gitea, arc-green]: Set the default theme for the Gitea install.
• SHOW_USER_EMAIL: true: Whether the email of the user should be shown in the Explore Users page.
• THEMES: auto,gitea,arc-green: All available themes. Allow users select personalized themes. regardless of the value of DEFAULT_THEME.
• THEME_COLOR_META_TAG: #6cc644: Value of theme-color meta tag, used by Android >= 5.0. An invalid color like "none" or "disable" will have the default style. More info: https://developers.google.com/web/updates/2014/11/Support-for-theme-color-in-Chrome-39-for-Android
• MAX_DISPLAY_FILE_SIZE: 8388608: Max size of files to be displayed (default is 8MiB)
• REACTIONS: All available reactions users can choose on issues/prs and comments Values can be emoji alias (😄) or a unicode emoji. For custom reactions, add a tightly cropped square image to public/img/emoji/reaction_name.png
• CUSTOM_EMOJIS: gitea, codeberg, gitlab, git, github, gogs: Additional Emojis not defined in the utf8 standard. By default we support Gitea (), to add more copy them to public/img/emoji/emoji_name.png and add it to this config.
• DEFAULT_SHOW_FULL_NAME: false: Whether the full name of the users should be shown where possible. If the full name isn't set, the username will be used.
• SEARCH_REPO_DESCRIPTION: true: Whether to search within description at repository search on explore page.
• USE_SERVICE_WORKER: false: Whether to enable a Service Worker to cache frontend assets.
• ONLY_SHOW_RELEVANT_REPOS: false Whether to only show relevant repos on the explore page when no keyword is specified and default sorting is used. A repo is considered irrelevant if it's a fork or if it has no metadata (no description, no icon, no topic).

UI - Admin (ui.admin)

• USER_PAGING_NUM: 50: Number of users that are shown in one page.
• REPO_PAGING_NUM: 50: Number of repos that are shown in one page.
• NOTICE_PAGING_NUM: 25: Number of notices that are shown in one page.
• ORG_PAGING_NUM: 50: Number of organizations that are shown in one page.

UI - User (ui.user)

• REPO_PAGING_NUM: 15: Number of repos that are shown in one page.

UI - Metadata (ui.meta)

• AUTHOR: Gitea - Git with a cup of tea: Author meta tag of the homepage.
• DESCRIPTION: Gitea (Git with a cup of tea) is a painless self-hosted Git service written in Go: Description meta tag of the homepage.
• KEYWORDS: go,git,self-hosted,gitea: Keywords meta tag of the homepage.

UI - Notification (ui.notification)

• MIN_TIMEOUT: 10s: These options control how often notification endpoint is polled to update the notification count. On page load the notification count will be checked after MIN_TIMEOUT. The timeout will increase to MAX_TIMEOUT by TIMEOUT_STEP if the notification count is unchanged. Set MIN_TIMEOUT to -1 to turn off.
• MAX_TIMEOUT: 60s.
• TIMEOUT_STEP: 10s.
• EVENT_SOURCE_UPDATE_TIME: 10s: This setting determines how often the database is queried to update notification counts. If the browser client supports EventSource and SharedWorker, a SharedWorker will be used in preference to polling notification endpoint. Set to -1 to disable the EventSource.

UI - SVG Images (ui.svg)

• ENABLE_RENDER: true: Whether to render SVG files as images. If SVG rendering is disabled, SVG files are displayed as text and cannot be embedded in markdown files as images.

UI - CSV Files (ui.csv)

• MAX_FILE_SIZE: 524288 (512kb): Maximum allowed file size in bytes to render CSV files as table. (Set to 0 for no limit).

Markdown (markdown)

• ENABLE_HARD_LINE_BREAK_IN_COMMENTS: true: Render soft line breaks as hard line breaks in comments, which means a single newline character between paragraphs will cause a line break and adding trailing whitespace to paragraphs is not necessary to force a line break.
• ENABLE_HARD_LINE_BREAK_IN_DOCUMENTS: false: Render soft line breaks as hard line breaks in documents, which means a single newline character between paragraphs will cause a line break and adding trailing whitespace to paragraphs is not necessary to force a line break.
• CUSTOM_URL_SCHEMES: Use a comma separated list (ftp,git,svn) to indicate additional URL hyperlinks to be rendered in Markdown. URLs beginning in http and https are always displayed
• ENABLE_MATH: true: Enables detection of \(...\), \[...\], $...$ and $$...$$ blocks as math blocks.

Server (server)

• APP_DATA_PATH: AppWorkPath/data: This is the default root path for storing data.

• PROTOCOL: http: [http, https, fcgi, http+unix, fcgi+unix]

• USE_PROXY_PROTOCOL: false: Expect PROXY protocol headers on connections

• PROXY_PROTOCOL_TLS_BRIDGING: false: When protocol is https, expect PROXY protocol headers after TLS negotiation.

• PROXY_PROTOCOL_HEADER_TIMEOUT: 5s: Timeout to wait for PROXY protocol header (set to 0 to have no timeout)

• PROXY_PROTOCOL_ACCEPT_UNKNOWN: false: Accept PROXY protocol headers with Unknown type.

• DOMAIN: localhost: Domain name of this server.

• ROOT_URL: %(PROTOCOL)s://%(DOMAIN)s:%(HTTP_PORT)s/: Overwrite the automatically generated public URL. This is useful if the internal and the external URL don't match (e.g. in Docker).

• STATIC_URL_PREFIX: <empty>: Overwrite this option to request static resources from a different URL. This includes CSS files, images, JS files and web fonts. Avatar images are dynamic resources and still served by Gitea. The option can be just a different path, as in /static, or another domain, as in https://cdn.example.com. Requests are then made as %(ROOT_URL)s/static/assets/css/index.css or https://cdn.example.com/assets/css/index.css respectively. The static files are located in the public/ directory of the Gitea source repository. You can proxy the STATIC_URL_PREFIX requests to Gitea server to serve the static assets, or copy the manually built Gitea assets from $GITEA_BUILD/public to the assets location, eg: /var/www/assets, make sure $STATIC_URL_PREFIX/assets/css/index.css points to /var/www/assets/css/index.css.

• HTTP_ADDR: 0.0.0.0: HTTP listen address.

  • If PROTOCOL is set to fcgi, Gitea will listen for FastCGI requests on TCP socket defined by HTTP_ADDR and HTTP_PORT configuration settings.
  • If PROTOCOL is set to http+unix or fcgi+unix, this should be the name of the Unix socket file to use. Relative paths will be made absolute against the AppWorkPath.

• HTTP_PORT: 3000: HTTP listen port.

  • If PROTOCOL is set to fcgi, Gitea will listen for FastCGI requests on TCP socket defined by HTTP_ADDR and HTTP_PORT configuration settings.

• UNIX_SOCKET_PERMISSION: 666: Permissions for the Unix socket.

• LOCAL_ROOT_URL: %(PROTOCOL)s://%(HTTP_ADDR)s:%(HTTP_PORT)s/: Local (DMZ) URL for Gitea workers (such as SSH update) accessing web service. In most cases you do not need to change the default value. Alter it only if your SSH server node is not the same as HTTP node. Do not set this variable if PROTOCOL is set to http+unix.

• LOCAL_USE_PROXY_PROTOCOL: %(USE_PROXY_PROTOCOL)s: When making local connections pass the PROXY protocol header. This should be set to false if the local connection will go through the proxy.

• PER_WRITE_TIMEOUT: 30s: Timeout for any write to the connection. (Set to -1 to disable all timeouts.)

• PER_WRITE_PER_KB_TIMEOUT: 10s: Timeout per Kb written to connections.

• DISABLE_SSH: false: Disable SSH feature when it's not available.

• START_SSH_SERVER: false: When enabled, use the built-in SSH server.

• SSH_SERVER_USE_PROXY_PROTOCOL: false: Expect PROXY protocol header on connections to the built-in SSH Server.

• BUILTIN_SSH_SERVER_USER: %(RUN_USER)s: Username to use for the built-in SSH Server.

• SSH_USER: %(BUILTIN_SSH_SERVER_USER)s: SSH username displayed in clone URLs. This is only for people who configure the SSH server themselves; in most cases, you want to leave this blank and modify the BUILTIN_SSH_SERVER_USER.

• SSH_DOMAIN: %(DOMAIN)s: Domain name of this server, used for displayed clone URL.

• SSH_PORT: 22: SSH port displayed in clone URL.

• SSH_LISTEN_HOST: 0.0.0.0: Listen address for the built-in SSH server.

• SSH_LISTEN_PORT: %(SSH_PORT)s: Port for the built-in SSH server.

• SSH_ROOT_PATH: ~/.ssh: Root path of SSH directory.

• SSH_CREATE_AUTHORIZED_KEYS_FILE: true: Gitea will create a authorized_keys file by default when it is not using the internal ssh server. If you intend to use the AuthorizedKeysCommand functionality then you should turn this off.

• SSH_AUTHORIZED_KEYS_BACKUP: true: Enable SSH Authorized Key Backup when rewriting all keys, default is true.

• SSH_TRUSTED_USER_CA_KEYS: <empty>: Specifies the public keys of certificate authorities that are trusted to sign user certificates for authentication. Multiple keys should be comma separated. E.g.ssh-<algorithm> <key> or ssh-<algorithm> <key1>, ssh-<algorithm> <key2>. For more information see TrustedUserCAKeys in the sshd config man pages. When empty no file will be created and SSH_AUTHORIZED_PRINCIPALS_ALLOW will default to off.

• SSH_TRUSTED_USER_CA_KEYS_FILENAME: RUN_USER/.ssh/gitea-trusted-user-ca-keys.pem: Absolute path of the TrustedUserCaKeys file Gitea will manage. If you're running your own ssh server and you want to use the Gitea managed file you'll also need to modify your sshd_config to point to this file. The official docker image will automatically work without further configuration.

• SSH_AUTHORIZED_PRINCIPALS_ALLOW: off or username, email: [off, username, email, anything]: Specify the principals values that users are allowed to use as principal. When set to anything no checks are done on the principal string. When set to off authorized principal are not allowed to be set.

• SSH_CREATE_AUTHORIZED_PRINCIPALS_FILE: false/true: Gitea will create a authorized_principals file by default when it is not using the internal ssh server and SSH_AUTHORIZED_PRINCIPALS_ALLOW is not off.

• SSH_AUTHORIZED_PRINCIPALS_BACKUP: false/true: Enable SSH Authorized Principals Backup when rewriting all keys, default is true if SSH_AUTHORIZED_PRINCIPALS_ALLOW is not off.

• SSH_AUTHORIZED_KEYS_COMMAND_TEMPLATE: {{.AppPath}} --config={{.CustomConf}} serv key-{{.Key.ID}}: Set the template for the command to passed on authorized keys. Possible keys are: AppPath, AppWorkPath, CustomConf, CustomPath, Key - where Key is a models/asymkey.PublicKey and the others are strings which are shellquoted.

• SSH_SERVER_CIPHERS: chacha20-poly1305@openssh.com, aes128-ctr, aes192-ctr, aes256-ctr, aes128-gcm@openssh.com, aes256-gcm@openssh.com: For the built-in SSH server, choose the ciphers to support for SSH connections, for system SSH this setting has no effect.

• SSH_SERVER_KEY_EXCHANGES: curve25519-sha256, ecdh-sha2-nistp256, ecdh-sha2-nistp384, ecdh-sha2-nistp521, diffie-hellman-group14-sha256, diffie-hellman-group14-sha1: For the built-in SSH server, choose the key exchange algorithms to support for SSH connections, for system SSH this setting has no effect.

• SSH_SERVER_MACS: hmac-sha2-256-etm@openssh.com, hmac-sha2-256, hmac-sha1: For the built-in SSH server, choose the MACs to support for SSH connections, for system SSH this setting has no effect

• SSH_SERVER_HOST_KEYS: ssh/gitea.rsa, ssh/gogs.rsa: For the built-in SSH server, choose the keypairs to offer as the host key. The private key should be at SSH_SERVER_HOST_KEY and the public SSH_SERVER_HOST_KEY.pub. Relative paths are made absolute relative to the APP_DATA_PATH. If no key exists a 4096 bit RSA key will be created for you.

• SSH_KEY_TEST_PATH: /tmp: Directory to create temporary files in when testing public keys using ssh-keygen, default is the system temporary directory.

• SSH_KEYGEN_PATH: ssh-keygen: Path to ssh-keygen, default is 'ssh-keygen' which means the shell is responsible for finding out which one to call.

• SSH_EXPOSE_ANONYMOUS: false: Enable exposure of SSH clone URL to anonymous visitors, default is false.

• SSH_PER_WRITE_TIMEOUT: 30s: Timeout for any write to the SSH connections. (Set to -1 to disable all timeouts.)

• SSH_PER_WRITE_PER_KB_TIMEOUT: 10s: Timeout per Kb written to SSH connections.

• MINIMUM_KEY_SIZE_CHECK: true: Indicate whether to check minimum key size with corresponding type.

• OFFLINE_MODE: false: Disables use of CDN for static files and Gravatar for profile pictures.

• CERT_FILE: https/cert.pem: Cert file path used for HTTPS. When chaining, the server certificate must come first, then intermediate CA certificates (if any). This is ignored if ENABLE_ACME=true. Paths are relative to CUSTOM_PATH.

• KEY_FILE: https/key.pem: Key file path used for HTTPS. This is ignored if ENABLE_ACME=true. Paths are relative to CUSTOM_PATH.

• STATIC_ROOT_PATH: StaticRootPath: Upper level of template and static files path.

• APP_DATA_PATH: data (/data/gitea on docker): Default path for application data. Relative paths will be made absolute against AppWorkPath.

• STATIC_CACHE_TIME: 6h: Web browser cache time for static resources on custom/, public/ and all uploaded avatars. Note that this cache is disabled when RUN_MODE is "dev".

• ENABLE_GZIP: false: Enable gzip compression for runtime-generated content, static resources excluded.

• ENABLE_PPROF: false: Application profiling (memory and cpu). For "web" command it listens on localhost:6060. For "serv" command it dumps to disk at PPROF_DATA_PATH as (cpuprofile|memprofile)_<username>_<temporary id>

• PPROF_DATA_PATH: AppWorkPath/data/tmp/pprof: PPROF_DATA_PATH, use an absolute path when you start Gitea as service

• LANDING_PAGE: home: Landing page for unauthenticated users [home, explore, organizations, login, custom]. Where custom would instead be any URL such as "/org/repo" or even https://anotherwebsite.com

• LFS_START_SERVER: false: Enables Git LFS support.

• LFS_CONTENT_PATH: %(APP_DATA_PATH)s/lfs: Default LFS content path. (if it is on local storage.) DEPRECATED use settings in [lfs].

• LFS_JWT_SECRET: <empty>: LFS authentication secret, change this a unique string.

• LFS_HTTP_AUTH_EXPIRY: 20m: LFS authentication validity period in time.Duration, pushes taking longer than this may fail.

• LFS_MAX_FILE_SIZE: 0: Maximum allowed LFS file size in bytes (Set to 0 for no limit).

• LFS_LOCKS_PAGING_NUM: 50: Maximum number of LFS Locks returned per page.

• REDIRECT_OTHER_PORT: false: If true and PROTOCOL is https, allows redirecting http requests on PORT_TO_REDIRECT to the https port Gitea listens on.

• REDIRECTOR_USE_PROXY_PROTOCOL: %(USE_PROXY_PROTOCOL)s: expect PROXY protocol header on connections to https redirector.

• PORT_TO_REDIRECT: 80: Port for the http redirection service to listen on. Used when REDIRECT_OTHER_PORT is true.

• SSL_MIN_VERSION: TLSv1.2: Set the minimum version of ssl support.

• SSL_MAX_VERSION: <empty>: Set the maximum version of ssl support.

• SSL_CURVE_PREFERENCES: X25519,P256: Set the preferred curves,

• SSL_CIPHER_SUITES: ecdhe_ecdsa_with_aes_256_gcm_sha384,ecdhe_rsa_with_aes_256_gcm_sha384,ecdhe_ecdsa_with_aes_128_gcm_sha256,ecdhe_rsa_with_aes_128_gcm_sha256,ecdhe_ecdsa_with_chacha20_poly1305,ecdhe_rsa_with_chacha20_poly1305: Set the preferred cipher suites.

  • If there is no hardware support for AES suites, by default the ChaCha suites will be preferred over the AES suites.
  • supported suites as of Go 1.18 are:
    • TLS 1.0 - 1.2 cipher suites
      • "rsa_with_rc4_128_sha"
      • "rsa_with_3des_ede_cbc_sha"
      • "rsa_with_aes_128_cbc_sha"
      • "rsa_with_aes_256_cbc_sha"
      • "rsa_with_aes_128_cbc_sha256"
      • "rsa_with_aes_128_gcm_sha256"
      • "rsa_with_aes_256_gcm_sha384"
      • "ecdhe_ecdsa_with_rc4_128_sha"
      • "ecdhe_ecdsa_with_aes_128_cbc_sha"
      • "ecdhe_ecdsa_with_aes_256_cbc_sha"
      • "ecdhe_rsa_with_rc4_128_sha"
      • "ecdhe_rsa_with_3des_ede_cbc_sha"
      • "ecdhe_rsa_with_aes_128_cbc_sha"
      • "ecdhe_rsa_with_aes_256_cbc_sha"
      • "ecdhe_ecdsa_with_aes_128_cbc_sha256"
      • "ecdhe_rsa_with_aes_128_cbc_sha256"
      • "ecdhe_rsa_with_aes_128_gcm_sha256"
      • "ecdhe_ecdsa_with_aes_128_gcm_sha256"
      • "ecdhe_rsa_with_aes_256_gcm_sha384"
      • "ecdhe_ecdsa_with_aes_256_gcm_sha384"
      • "ecdhe_rsa_with_chacha20_poly1305_sha256"
      • "ecdhe_ecdsa_with_chacha20_poly1305_sha256"
    • TLS 1.3 cipher suites
      • "aes_128_gcm_sha256"
      • "aes_256_gcm_sha384"
      • "chacha20_poly1305_sha256"
    • Aliased names
      • "ecdhe_rsa_with_chacha20_poly1305" is an alias for "ecdhe_rsa_with_chacha20_poly1305_sha256"
      • "ecdhe_ecdsa_with_chacha20_poly1305" is alias for "ecdhe_ecdsa_with_chacha20_poly1305_sha256"

• ENABLE_ACME: false: Flag to enable automatic certificate management via an ACME capable Certificate Authority (CA) server (default: Lets Encrypt). If enabled, CERT_FILE and KEY_FILE are ignored, and the CA must resolve DOMAIN to this gitea server. Ensure that DNS records are set and either port 80 or port 443 are accessible by the CA server (the public internet by default), and redirected to the appropriate ports PORT_TO_REDIRECT or HTTP_PORT respectively.

• ACME_URL: <empty>: The CA's ACME directory URL, e.g. for a self-hosted smallstep CA server, it can look like https://ca.example.com/acme/acme/directory. If left empty, it defaults to using Let's Encerypt's production CA (check LETSENCRYPT_ACCEPTTOS as well).

• ACME_ACCEPTTOS: false: This is an explicit check that you accept the terms of service of the ACME provider. The default is Lets Encrypt terms of service.

• ACME_DIRECTORY: https: Directory that the certificate manager will use to cache information such as certs and private keys.

• ACME_EMAIL: <empty>: Email used for the ACME registration. Usually it is to notify about problems with issued certificates.

• ACME_CA_ROOT: <empty>: The CA's root certificate. If left empty, it defaults to using the system's trust chain.

• ALLOW_GRACEFUL_RESTARTS: true: Perform a graceful restart on SIGHUP

• GRACEFUL_HAMMER_TIME: 60s: After a restart the parent process will stop accepting new connections and will allow requests to finish before stopping. Shutdown will be forced if it takes longer than this time.

• STARTUP_TIMEOUT: 0: Shutsdown the server if startup takes longer than the provided time. On Windows setting this sends a waithint to the SVC host to tell the SVC host startup may take some time. Please note startup is determined by the opening of the listeners - HTTP/HTTPS/SSH. Indexers may take longer to startup and can have their own timeouts.

Database (database)

• DB_TYPE: mysql: The database type in use [mysql, postgres, mssql, sqlite3].
• HOST: 127.0.0.1:3306: Database host address and port or absolute path for unix socket [mysql, postgres] (ex: /var/run/mysqld/mysqld.sock).
• NAME: gitea: Database name.
• USER: root: Database username.
• PASSWD: <empty>: Database user password. Use `your password` or """your password""" for quoting if you use special characters in the password.
• SCHEMA: <empty>: For PostgreSQL only, schema to use if different from "public". The schema must exist beforehand, the user must have creation privileges on it, and the user search path must be set to the look into the schema first (e.g. ALTER USER user SET SEARCH_PATH = schema_name,"$user",public;).
• SSL_MODE: disable: SSL/TLS encryption mode for connecting to the database. This option is only applied for PostgreSQL and MySQL.
  • Valid values for MySQL:
    • true: Enable TLS with verification of the database server certificate against its root certificate. When selecting this option make sure that the root certificate required to validate the database server certificate (e.g. the CA certificate) is on the system certificate store of both the database and Gitea servers. See your system documentation for instructions on how to add a CA certificate to the certificate store.
    • false: Disable TLS.
    • disable: Alias for false, for compatibility with PostgreSQL.
    • skip-verify: Enable TLS without database server certificate verification. Use this option if you have self-signed or invalid certificate on the database server.
    • prefer: Enable TLS with fallback to non-TLS connection.
  • Valid values for PostgreSQL:
    • disable: Disable TLS.
    • require: Enable TLS without any verifications.
    • verify-ca: Enable TLS with verification of the database server certificate against its root certificate.
    • verify-full: Enable TLS and verify the database server name matches the given certificate in either the Common Name or Subject Alternative Name fields.
• SQLITE_TIMEOUT: 500: Query timeout for SQLite3 only.
• SQLITE_JOURNAL_MODE: "": Change journal mode for SQlite3. Can be used to enable WAL mode when high load causes write congestion. See SQlite3 docs for possible values. Defaults to the default for the database file, often DELETE.
• ITERATE_BUFFER_SIZE: 50: Internal buffer size for iterating.
• CHARSET: utf8mb4: For MySQL only, either "utf8" or "utf8mb4". NOTICE: for "utf8mb4" you must use MySQL InnoDB > 5.6. Gitea is unable to check this.
• PATH: data/gitea.db: For SQLite3 only, the database file path.
• LOG_SQL: true: Log the executed SQL.
• DB_RETRIES: 10: How many ORM init / DB connect attempts allowed.
• DB_RETRY_BACKOFF: 3s: time.Duration to wait before trying another ORM init / DB connect attempt, if failure occurred.
• MAX_OPEN_CONNS 0: Database maximum open connections - default is 0, meaning there is no limit.
• MAX_IDLE_CONNS 2: Max idle database connections on connection pool, default is 2 - this will be capped to MAX_OPEN_CONNS.
• CONN_MAX_LIFETIME 0 or 3s: Sets the maximum amount of time a DB connection may be reused - default is 0, meaning there is no limit (except on MySQL where it is 3s - see #6804 & #7071).
• AUTO_MIGRATION true: Whether execute database models migrations automatically.

Please see #8540 & #8273 for further discussion of the appropriate values for MAX_OPEN_CONNS, MAX_IDLE_CONNS & CONN_MAX_LIFETIME and their relation to port exhaustion.

Indexer (indexer)

• ISSUE_INDEXER_TYPE: bleve: Issue indexer type, currently supported: bleve, db or elasticsearch.

• ISSUE_INDEXER_CONN_STR: ****: Issue indexer connection string, available when ISSUE_INDEXER_TYPE is elasticsearch. i.e. http://elastic:changeme@localhost:9200

• ISSUE_INDEXER_NAME: gitea_issues: Issue indexer name, available when ISSUE_INDEXER_TYPE is elasticsearch

• ISSUE_INDEXER_PATH: indexers/issues.bleve: Index file used for issue search; available when ISSUE_INDEXER_TYPE is bleve and elasticsearch. Relative paths will be made absolute against AppWorkPath.

• The next 4 configuration values are deprecated and should be set in queue.issue_indexer however are kept for backwards compatibility:

• ISSUE_INDEXER_QUEUE_TYPE: levelqueue: Issue indexer queue, currently supports:channel, levelqueue, redis. DEPRECATED use settings in [queue.issue_indexer].

• ISSUE_INDEXER_QUEUE_DIR: queues/common: When ISSUE_INDEXER_QUEUE_TYPE is levelqueue, this will be the path where the queue will be saved. DEPRECATED use settings in [queue.issue_indexer]. Relative paths will be made absolute against %(APP_DATA_PATH)s.

• ISSUE_INDEXER_QUEUE_CONN_STR: addrs=127.0.0.1:6379 db=0: When ISSUE_INDEXER_QUEUE_TYPE is redis, this will store the redis connection string. When ISSUE_INDEXER_QUEUE_TYPE is levelqueue, this is a directory or additional options of the form leveldb://path/to/db?option=value&...., and overrides ISSUE_INDEXER_QUEUE_DIR. DEPRECATED use settings in [queue.issue_indexer].

• ISSUE_INDEXER_QUEUE_BATCH_NUMBER: 20: Batch queue number. DEPRECATED use settings in [queue.issue_indexer].

• REPO_INDEXER_ENABLED: false: Enables code search (uses a lot of disk space, about 6 times more than the repository size).

• REPO_INDEXER_TYPE: bleve: Code search engine type, could be bleve or elasticsearch.

• REPO_INDEXER_PATH: indexers/repos.bleve: Index file used for code search.

• REPO_INDEXER_CONN_STR: ****: Code indexer connection string, available when REPO_INDEXER_TYPE is elasticsearch. i.e. http://elastic:changeme@localhost:9200

• REPO_INDEXER_NAME: gitea_codes: Code indexer name, available when REPO_INDEXER_TYPE is elasticsearch

• REPO_INDEXER_INCLUDE: empty: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to include in the index. Use **.txt to match any files with .txt extension. An empty list means include all files.

• REPO_INDEXER_EXCLUDE: empty: A comma separated list of glob patterns (see https://github.com/gobwas/glob) to exclude from the index. Files that match this list will not be indexed, even if they match in REPO_INDEXER_INCLUDE.

• REPO_INDEXER_EXCLUDE_VENDORED: true: Exclude vendored files from index.

• UPDATE_BUFFER_LEN: 20: Buffer length of index request. DEPRECATED use settings in [queue.issue_indexer].

• MAX_FILE_SIZE: 1048576: Maximum size in bytes of files to be indexed.

• STARTUP_TIMEOUT: 30s: If the indexer takes longer than this timeout to start - fail. (This timeout will be added to the hammer time above for child processes - as bleve will not start until the previous parent is shutdown.) Set to -1 to never timeout.

Queue (queue and queue.*)

Configuration at [queue] will set defaults for queues with overrides for individual queues at [queue.*]. (However see below.)

• TYPE: persistable-channel: General queue type, currently support: persistable-channel (uses a LevelDB internally), channel, level, redis, dummy
• DATADIR: queues/: Base DataDir for storing persistent and level queues. DATADIR for individual queues can be set in queue.name sections but will default to DATADIR/common. (Previously each queue would default to DATADIR/name.) Relative paths will be made absolute against %(APP_DATA_PATH)s.
• LENGTH: 20: Maximal queue size before channel queues block
• BATCH_LENGTH: 20: Batch data before passing to the handler
• CONN_STR: redis://127.0.0.1:6379/0: Connection string for the redis queue type. Options can be set using query params. Similarly LevelDB options can also be set using: leveldb://relative/path?option=value or leveldb:///absolute/path?option=value, and will override DATADIR
• QUEUE_NAME: _queue: The suffix for default redis and disk queue name. Individual queues will default to nameQUEUE_NAME but can be overridden in the specific queue.name section.
• SET_NAME: _unique: The suffix that will be added to the default redis and disk queue set name for unique queues. Individual queues will default to nameQUEUE_NAMESET_NAME but can be overridden in the specific queue.name section.
• WRAP_IF_NECESSARY: true: Will wrap queues with a timeoutable queue if the selected queue is not ready to be created - (Only relevant for the level queue.)
• MAX_ATTEMPTS: 10: Maximum number of attempts to create the wrapped queue
• TIMEOUT: GRACEFUL_HAMMER_TIME + 30s: Timeout the creation of the wrapped queue if it takes longer than this to create.
• Queues by default come with a dynamically scaling worker pool. The following settings configure this:
• WORKERS: 0: Number of initial workers for the queue.
• MAX_WORKERS: 10: Maximum number of worker go-routines for the queue.
• BLOCK_TIMEOUT: 1s: If the queue blocks for this time, boost the number of workers - the BLOCK_TIMEOUT will then be doubled before boosting again whilst the boost is ongoing.
• BOOST_TIMEOUT: 5m: Boost workers will timeout after this long.
• BOOST_WORKERS: 1: This many workers will be added to the worker pool if there is a boost.

Gitea creates the following non-unique queues:

• code_indexer
• issue_indexer
• notification-service
• task
• mail
• push_update

And the following unique queues:

• repo_stats_update
• repo-archive
• mirror
• pr_patch_checker

Certain queues have defaults that override the defaults set in [queue] (this occurs mostly to support older configuration):

• [queue.issue_indexer]
  • TYPE this will default to [queue] TYPE if it is set but if not it will appropriately convert [indexer] ISSUE_INDEXER_QUEUE_TYPE if that is set.
  • LENGTH will default to [indexer] UPDATE_BUFFER_LEN if that is set.
  • BATCH_LENGTH will default to [indexer] ISSUE_INDEXER_QUEUE_BATCH_NUMBER if that is set.
  • DATADIR will default to [indexer] ISSUE_INDEXER_QUEUE_DIR if that is set.
  • CONN_STR will default to [indexer] ISSUE_INDEXER_QUEUE_CONN_STR if that is set.
• [queue.mailer]
  • LENGTH will default to 100 or whatever [mailer] SEND_BUFFER_LEN is.
• [queue.pr_patch_checker]
  • LENGTH will default to 1000 or whatever [repository] PULL_REQUEST_QUEUE_LENGTH is.
• [queue.mirror]
  • LENGTH will default to 1000 or whatever [repository] MIRROR_QUEUE_LENGTH is.

Admin (admin)

• DEFAULT_EMAIL_NOTIFICATIONS: enabled: Default configuration for email notifications for users (user configurable). Options: enabled, onmention, disabled
• DISABLE_REGULAR_ORG_CREATION: false: Disallow regular (non-admin) users from creating organizations.

Security (security)

• INSTALL_LOCK: false: Controls access to the installation page. When set to "true", the installation page is not accessible.
• SECRET_KEY: <random at every install>: Global secret key. This key is VERY IMPORTANT, if you lost it, the data encrypted by it (like 2FA secret) can't be decrypted anymore.
• SECRET_KEY_URI: : Instead of defining SECRET_KEY, this option can be used to use the key stored in a file (example value: file:/etc/gitea/secret_key). It shouldn't be lost like SECRET_KEY.
• LOGIN_REMEMBER_DAYS: 7: Cookie lifetime, in days.
• COOKIE_USERNAME: gitea_awesome: Name of the cookie used to store the current username.
• COOKIE_REMEMBER_NAME: gitea_incredible: Name of cookie used to store authentication information.
• REVERSE_PROXY_AUTHENTICATION_USER: X-WEBAUTH-USER: Header name for reverse proxy authentication.
• REVERSE_PROXY_AUTHENTICATION_EMAIL: X-WEBAUTH-EMAIL: Header name for reverse proxy authentication provided email.
• REVERSE_PROXY_AUTHENTICATION_FULL_NAME: X-WEBAUTH-FULLNAME: Header name for reverse proxy authentication provided full name.
• REVERSE_PROXY_LIMIT: 1: Interpret X-Forwarded-For header or the X-Real-IP header and set this as the remote IP for the request. Number of trusted proxy count. Set to zero to not use these headers.
• REVERSE_PROXY_TRUSTED_PROXIES: 127.0.0.0/8,::1/128: List of IP addresses and networks separated by comma of trusted proxy servers. Use * to trust all.
• DISABLE_GIT_HOOKS: true: Set to false to enable users with Git Hook privilege to create custom Git Hooks. WARNING: Custom Git Hooks can be used to perform arbitrary code execution on the host operating system. This enables the users to access and modify this config file and the Gitea database and interrupt the Gitea service. By modifying the Gitea database, users can gain Gitea administrator privileges. It also enables them to access other resources available to the user on the operating system that is running the Gitea instance and perform arbitrary actions in the name of the Gitea OS user. This maybe harmful to you website or your operating system. Setting this to true does not change existing hooks in git repos; adjust it before if necessary.
• DISABLE_WEBHOOKS: false: Set to true to disable webhooks feature.
• ONLY_ALLOW_PUSH_IF_GITEA_ENVIRONMENT_SET: true: Set to false to allow local users to push to gitea-repositories without setting up the Gitea environment. This is not recommended and if you want local users to push to Gitea repositories you should set the environment appropriately.
• IMPORT_LOCAL_PATHS: false: Set to false to prevent all users (including admin) from importing local path on server.
• INTERNAL_TOKEN: <random at every install if no uri set>: Secret used to validate communication within Gitea binary.
• INTERNAL_TOKEN_URI: : Instead of defining INTERNAL_TOKEN in the configuration, this configuration option can be used to give Gitea a path to a file that contains the internal token (example value: file:/etc/gitea/internal_token)
• PASSWORD_HASH_ALGO: pbkdf2: The hash algorithm to use [argon2, pbkdf2, scrypt, bcrypt], argon2 will spend more memory than others.
• CSRF_COOKIE_HTTP_ONLY: true: Set false to allow JavaScript to read CSRF cookie.
• MIN_PASSWORD_LENGTH: 6: Minimum password length for new users.
• PASSWORD_COMPLEXITY: off: Comma separated list of character classes required to pass minimum complexity. If left empty or no valid values are specified, checking is disabled (off):
  • lower - use one or more lower latin characters
  • upper - use one or more upper latin characters
  • digit - use one or more digits
  • spec - use one or more special characters as !"#$%&'()*+,-./:;<=>?@[\\]^_`{|}~
  • off - do not check password complexity
• PASSWORD_CHECK_PWN: false: Check HaveIBeenPwned to see if a password has been exposed.
• SUCCESSFUL_TOKENS_CACHE_SIZE: 20: Cache successful token hashes. API tokens are stored in the DB as pbkdf2 hashes however, this means that there is a potentially significant hashing load when there are multiple API operations. This cache will store the successfully hashed tokens in a LRU cache as a balance between performance and security.

Camo (camo)

• ENABLED: false: Enable media proxy, we support images only at the moment.
• SERVER_URL: : URL of camo server, it is required if camo is enabled.
• HMAC_KEY: : Provide the HMAC key for encoding URLs, it is required if camo is enabled.
• ALLWAYS: false: Set to true to use camo for both HTTP and HTTPS content, otherwise only non-HTTPS URLs are proxied

OpenID (openid)

• ENABLE_OPENID_SIGNIN: false: Allow authentication in via OpenID.
• ENABLE_OPENID_SIGNUP: ! DISABLE_REGISTRATION: Allow registering via OpenID.
• WHITELISTED_URIS: <empty>: If non-empty, list of POSIX regex patterns matching OpenID URI's to permit.
• BLACKLISTED_URIS: <empty>: If non-empty, list of POSIX regex patterns matching OpenID URI's to block.

OAuth2 Client (oauth2_client)

• REGISTER_EMAIL_CONFIRM: [service] REGISTER_EMAIL_CONFIRM: Set this to enable or disable email confirmation of OAuth2 auto-registration. (Overwrites the REGISTER_EMAIL_CONFIRM setting of the [service] section)
• OPENID_CONNECT_SCOPES: <empty>: List of additional openid connect scopes. (openid is implicitly added)
• ENABLE_AUTO_REGISTRATION: false: Automatically create user accounts for new oauth2 users.
• USERNAME: nickname: The source of the username for new oauth2 accounts:
  • userid - use the userid / sub attribute
  • nickname - use the nickname attribute
  • email - use the username part of the email attribute
• UPDATE_AVATAR: false: Update avatar if available from oauth2 provider. Update will be performed on each login.
• ACCOUNT_LINKING: login: How to handle if an account / email already exists:
  • disabled - show an error
  • login - show an account linking login
  • auto - automatically link with the account (Please be aware that this will grant access to an existing account just because the same username or email is provided. You must make sure that this does not cause issues with your authentication providers.)

Service (service)

• ACTIVE_CODE_LIVE_MINUTES: 180: Time limit (min) to confirm account/email registration.
• RESET_PASSWD_CODE_LIVE_MINUTES: 180: Time limit (min) to confirm forgot password reset process.
• REGISTER_EMAIL_CONFIRM: false: Enable this to ask for mail confirmation of registration. Requires Mailer to be enabled.
• REGISTER_MANUAL_CONFIRM: false: Enable this to manually confirm new registrations. Requires REGISTER_EMAIL_CONFIRM to be disabled.
• DISABLE_REGISTRATION: false: Disable registration, after which only admin can create accounts for users.
• REQUIRE_EXTERNAL_REGISTRATION_PASSWORD: false: Enable this to force externally created accounts (via GitHub, OpenID Connect, etc) to create a password. Warning: enabling this will decrease security, so you should only enable it if you know what you're doing.
• REQUIRE_SIGNIN_VIEW: false: Enable this to force users to log in to view any page or to use API.
• ENABLE_NOTIFY_MAIL: false: Enable this to send e-mail to watchers of a repository when something happens, like creating issues. Requires Mailer to be enabled.
• ENABLE_BASIC_AUTHENTICATION: true: Disable this to disallow authenticaton using HTTP BASIC and the user's password. Please note if you disable this you will not be able to access the tokens API endpoints using a password. Further, this only disables BASIC authentication using the password - not tokens or OAuth Basic.
• ENABLE_REVERSE_PROXY_AUTHENTICATION: false: Enable this to allow reverse proxy authentication.
• ENABLE_REVERSE_PROXY_AUTO_REGISTRATION: false: Enable this to allow auto-registration for reverse authentication.
• ENABLE_REVERSE_PROXY_EMAIL: false: Enable this to allow to auto-registration with a provided email rather than a generated email.
• ENABLE_REVERSE_PROXY_FULL_NAME: false: Enable this to allow to auto-registration with a provided full name for the user.
• ENABLE_CAPTCHA: false: Enable this to use captcha validation for registration.
• REQUIRE_CAPTCHA_FOR_LOGIN: false: Enable this to require captcha validation for login. You also must enable ENABLE_CAPTCHA.
• REQUIRE_EXTERNAL_REGISTRATION_CAPTCHA: false: Enable this to force captcha validation even for External Accounts (i.e. GitHub, OpenID Connect, etc). You also must enable ENABLE_CAPTCHA.
• CAPTCHA_TYPE: image: [image, recaptcha, hcaptcha, mcaptcha]
• RECAPTCHA_SECRET: "": Go to https://www.google.com/recaptcha/admin to get a secret for recaptcha.
• RECAPTCHA_SITEKEY: "": Go to https://www.google.com/recaptcha/admin to get a sitekey for recaptcha.
• RECAPTCHA_URL: https://www.google.com/recaptcha/: Set the recaptcha url - allows the use of recaptcha net.
• HCAPTCHA_SECRET: "": Sign up at https://www.hcaptcha.com/ to get a secret for hcaptcha.
• HCAPTCHA_SITEKEY: "": Sign up at https://www.hcaptcha.com/ to get a sitekey for hcaptcha.
• MCAPTCHA_SECRET: "": Go to your mCaptcha instance to get a secret for mCaptcha.
• MCAPTCHA_SITEKEY: "": Go to your mCaptcha instance to get a sitekey for mCaptcha.
• MCAPTCHA_URL https://demo.mcaptcha.org/: Set the mCaptcha URL.
• DEFAULT_KEEP_EMAIL_PRIVATE: false: By default set users to keep their email address private.
• DEFAULT_ALLOW_CREATE_ORGANIZATION: true: Allow new users to create organizations by default.
• DEFAULT_USER_IS_RESTRICTED: false: Give new users restricted permissions by default
• DEFAULT_ENABLE_DEPENDENCIES: true: Enable this to have dependencies enabled by default.
• ALLOW_CROSS_REPOSITORY_DEPENDENCIES : true Enable this to allow dependencies on issues from any repository where the user is granted access.
• ENABLE_USER_HEATMAP: true: Enable this to display the heatmap on users profiles.
• ENABLE_TIMETRACKING: true: Enable Timetracking feature.
• DEFAULT_ENABLE_TIMETRACKING: true: Allow repositories to use timetracking by default.
• DEFAULT_ALLOW_ONLY_CONTRIBUTORS_TO_TRACK_TIME: true: Only allow users with write permissions to track time.
• EMAIL_DOMAIN_WHITELIST: <empty>: If non-empty, list of domain names that can only be used to register on this instance.
• EMAIL_DOMAIN_BLOCKLIST: <empty>: If non-empty, list of domain names that cannot be used to register on this instance
• SHOW_REGISTRATION_BUTTON: ! DISABLE_REGISTRATION: Show Registration Button
• SHOW_MILESTONES_DASHBOARD_PAGE: true Enable this to show the milestones dashboard page - a view of all the user's milestones
• AUTO_WATCH_NEW_REPOS: true: Enable this to let all organisation users watch new repos when they are created
• AUTO_WATCH_ON_CHANGES: false: Enable this to make users watch a repository after their first commit to it
• DEFAULT_USER_VISIBILITY: public: Set default visibility mode for users, either "public", "limited" or "private".
• ALLOWED_USER_VISIBILITY_MODES: public,limited,private: Set which visibility modes a user can have
• DEFAULT_ORG_VISIBILITY: public: Set default visibility mode for organisations, either "public", "limited" or "private".
• DEFAULT_ORG_MEMBER_VISIBLE: false True will make the membership of the users visible when added to the organisation.
• ALLOW_ONLY_INTERNAL_REGISTRATION: false Set to true to force registration only via Gitea.
• ALLOW_ONLY_EXTERNAL_REGISTRATION: false Set to true to force registration only using third-party services.
• NO_REPLY_ADDRESS: noreply.DOMAIN Value for the domain part of the user's email address in the Git log if user has set KeepEmailPrivate to true. DOMAIN resolves to the value in server.DOMAIN. The user's email will be replaced with a concatenation of the user name in lower case, "@" and NO_REPLY_ADDRESS.
• USER_DELETE_WITH_COMMENTS_MAX_TIME: 0 Minimum amount of time a user must exist before comments are kept when the user is deleted.
• VALID_SITE_URL_SCHEMES: http, https: Valid site url schemes for user profiles

Service - Explore (service.explore)

• REQUIRE_SIGNIN_VIEW: false: Only allow signed in users to view the explore pages.
• DISABLE_USERS_PAGE: false: Disable the users explore page.

SSH Minimum Key Sizes (ssh.minimum_key_sizes)

Define allowed algorithms and their minimum key length (use -1 to disable a type):

• ED25519: 256
• ECDSA: 256
• RSA: 2047: We set 2047 here because an otherwise valid 2048 RSA key can be reported as 2047 length.
• DSA: -1: DSA is now disabled by default. Set to 1024 to re-enable but ensure you may need to reconfigure your SSHD provider

Webhook (webhook)

• QUEUE_LENGTH: 1000: Hook task queue length. Use caution when editing this value.
• DELIVER_TIMEOUT: 5: Delivery timeout (sec) for shooting webhooks.
• ALLOWED_HOST_LIST: external: Webhook can only call allowed hosts for security reasons. Comma separated list.
  • Built-in networks:
    • loopback: 127.0.0.0/8 for IPv4 and ::1/128 for IPv6, localhost is included.
    • private: RFC 1918 (10.0.0.0/8, 172.16.0.0/12, 192.168.0.0/16) and RFC 4193 (FC00::/7). Also called LAN/Intranet.
    • external: A valid non-private unicast IP, you can access all hosts on public internet.
    • *: All hosts are allowed.
  • CIDR list: 1.2.3.0/8 for IPv4 and 2001:db8::/32 for IPv6
  • Wildcard hosts: *.mydomain.com, 192.168.100.*
• SKIP_TLS_VERIFY: false: Allow insecure certification.
• PAGING_NUM: 10: Number of webhook history events that are shown in one page.
• PROXY_URL: <empty>: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy. If not given, will use global proxy setting.
• PROXY_HOSTS: <empty>`: Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts. If not given, will use global proxy setting.

Mailer (mailer)

⚠️ This section is for Gitea 1.18 and later. If you are using Gitea 1.17 or older, please refer to Gitea 1.17 app.ini example and Gitea 1.17 configuration document

• ENABLED: false: Enable to use a mail service.
• PROTOCOL: <empty>: Mail server protocol. One of "smtp", "smtps", "smtp+starttls", "smtp+unix", "sendmail", "dummy". Before 1.18, this was inferred from a combination of MAILER_TYPE and IS_TLS_ENABLED.
  • SMTP family, if your provider does not explicitly say which protocol it uses but does provide a port, you can set SMTP_PORT instead and this will be inferred.
  • sendmail Use the operating system's sendmail command instead of SMTP. This is common on Linux systems.
  • dummy Send email messages to the log as a testing phase.
  • Note that enabling sendmail will ignore all other mailer settings except ENABLED, FROM, SUBJECT_PREFIX and SENDMAIL_PATH.
  • Enabling dummy will ignore all settings except ENABLED, SUBJECT_PREFIX and FROM.
• SMTP_ADDR: <empty>: Mail server address. e.g. smtp.gmail.com. For smtp+unix, this should be a path to a unix socket instead. Before 1.18, this was combined with SMTP_PORT under the name HOST.
• SMTP_PORT: <empty>: Mail server port. If no protocol is specified, it will be inferred by this setting. Common ports are listed below. Before 1.18, this was combined with SMTP_ADDR under the name HOST.
  • 25: insecure SMTP
  • 465: SMTP Secure
  • 587: StartTLS
• USE_CLIENT_CERT: false: Use client certificate for TLS/SSL.
• CLIENT_CERT_FILE: custom/mailer/cert.pem: Client certificate file.
• CLIENT_KEY_FILE: custom/mailer/key.pem: Client key file.
• FORCE_TRUST_SERVER_CERT: false: If set to true, completely ignores server certificate validation errors. This option is unsafe. Consider adding the certificate to the system trust store instead.
• USER: <empty>: Username of mailing user (usually the sender's e-mail address).
• PASSWD: <empty>: Password of mailing user. Use `your password` for quoting if you use special characters in the password.
  • Please note: authentication is only supported when the SMTP server communication is encrypted with TLS (this can be via STARTTLS) or SMTP host is localhost. See [Email Setup]({{< relref "doc/usage/email-setup.en-us.md" >}}) for more information.
• ENABLE_HELO: true: Enable HELO operation.
• HELO_HOSTNAME: (retrieved from system): HELO hostname.
• FROM: <empty>: Mail from address, RFC 5322. This can be just an email address, or the "Name" <email@example.com> format.
• ENVELOPE_FROM: <empty>: Address set as the From address on the SMTP mail envelope. Set to <> to send an empty address.
• SUBJECT_PREFIX: <empty>: Prefix to be placed before e-mail subject lines.
• SENDMAIL_PATH: sendmail: The location of sendmail on the operating system (can be command or full path).
• SENDMAIL_ARGS: <empty>: Specify any extra sendmail arguments. (NOTE: you should be aware that email addresses can look like options - if your sendmail command takes options you must set the option terminator --)
• SENDMAIL_TIMEOUT: 5m: default timeout for sending email through sendmail
• SENDMAIL_CONVERT_CRLF: true: Most versions of sendmail prefer LF line endings rather than CRLF line endings. Set this to false if your version of sendmail requires CRLF line endings.
• SEND_BUFFER_LEN: 100: Buffer length of mailing queue. DEPRECATED use LENGTH in [queue.mailer]
• SEND_AS_PLAIN_TEXT: false: Send mails only in plain text, without HTML alternative.

Incoming Email (email.incoming)

• ENABLED: false: Enable handling of incoming emails.
• REPLY_TO_ADDRESS: <empty>: The email address including the %{token} placeholder that will be replaced per user/action. Example: incoming+%{token}@example.com. The placeholder must appear in the user part of the address (before the @).
• HOST: <empty>: IMAP server host.
• PORT: <empty>: IMAP server port.
• USERNAME: <empty>: Username of the receiving account.
• PASSWORD: <empty>: Password of the receiving account.
• USE_TLS: false: Whether the IMAP server uses TLS.
• SKIP_TLS_VERIFY: false: If set to true, completely ignores server certificate validation errors. This option is unsafe.
• MAILBOX: INBOX: The mailbox name where incoming mail will end up.
• DELETE_HANDLED_MESSAGE: true: Whether handled messages should be deleted from the mailbox.
• MAXIMUM_MESSAGE_SIZE: 10485760: Maximum size of a message to handle. Bigger messages are ignored. Set to 0 to allow every size.

Cache (cache)

• ENABLED: true: Enable the cache.
• ADAPTER: memory: Cache engine adapter, either memory, redis, twoqueue or memcache. (twoqueue represents a size limited LRU cache.)
• INTERVAL: 60: Garbage Collection interval (sec), for memory and twoqueue cache only.
• HOST: <empty>: Connection string for redis and memcache. For twoqueue sets configuration for the queue.
  • Redis: redis://:macaron@127.0.0.1:6379/0?pool_size=100&idle_timeout=180s
  • Memcache: 127.0.0.1:9090;127.0.0.1:9091
  • TwoQueue LRU cache: {"size":50000,"recent_ratio":0.25,"ghost_ratio":0.5} or 50000 representing the maximum number of objects stored in the cache.
• ITEM_TTL: 16h: Time to keep items in cache if not used, Setting it to -1 disables caching.

Cache - LastCommitCache settings (cache.last_commit)

• ENABLED: true: Enable the cache.
• ITEM_TTL: 8760h: Time to keep items in cache if not used, Setting it to -1 disables caching.
• COMMITS_COUNT: 1000: Only enable the cache when repository's commits count great than.

Session (session)

• PROVIDER: memory: Session engine provider [memory, file, redis, db, mysql, couchbase, memcache, postgres]. Setting db will reuse the configuration in [database]
• PROVIDER_CONFIG: data/sessions: For file, the root path; for db, empty (database config will be used); for others, the connection string. Relative paths will be made absolute against AppWorkPath.
• COOKIE_SECURE: false: Enable this to force using HTTPS for all session access.
• COOKIE_NAME: i_like_gitea: The name of the cookie used for the session ID.
• GC_INTERVAL_TIME: 86400: GC interval in seconds.
• SESSION_LIFE_TIME: 86400: Session life time in seconds, default is 86400 (1 day)
• DOMAIN: <empty>: Sets the cookie Domain
• SAME_SITE: lax [strict, lax, none]: Set the SameSite setting for the cookie.

Picture (picture)

• GRAVATAR_SOURCE: gravatar: Can be gravatar, duoshuo or anything like http://cn.gravatar.com/avatar/.

• DISABLE_GRAVATAR: false: Enable this to use local avatars only. DEPRECATED [v1.18+] moved to database. Use admin panel to configure.

• ENABLE_FEDERATED_AVATAR: false: Enable support for federated avatars (see http://www.libravatar.org). DEPRECATED [v1.18+] moved to database. Use admin panel to configure.

• AVATAR_STORAGE_TYPE: default: Storage type defined in [storage.xxx]. Default is default which will read [storage] if no section [storage] will be a type local.

• AVATAR_UPLOAD_PATH: data/avatars: Path to store user avatar image files.

• AVATAR_MAX_WIDTH: 4096: Maximum avatar image width in pixels.

• AVATAR_MAX_HEIGHT: 3072: Maximum avatar image height in pixels.

• AVATAR_MAX_FILE_SIZE: 1048576 (1Mb): Maximum avatar image file size in bytes.

• AVATAR_RENDERED_SIZE_FACTOR: 3: The multiplication factor for rendered avatar images. Larger values result in finer rendering on HiDPI devices.

• REPOSITORY_AVATAR_STORAGE_TYPE: default: Storage type defined in [storage.xxx]. Default is default which will read [storage] if no section [storage] will be a type local.

• REPOSITORY_AVATAR_UPLOAD_PATH: data/repo-avatars: Path to store repository avatar image files.

• REPOSITORY_AVATAR_FALLBACK: none: How Gitea deals with missing repository avatars

  • none = no avatar will be displayed
  • random = random avatar will be generated
  • image = default image will be used (which is set in REPOSITORY_AVATAR_FALLBACK_IMAGE)

• REPOSITORY_AVATAR_FALLBACK_IMAGE: /img/repo_default.png: Image used as default repository avatar (if REPOSITORY_AVATAR_FALLBACK is set to image and none was uploaded)

Project (project)

Default templates for project boards:

• PROJECT_BOARD_BASIC_KANBAN_TYPE: To Do, In Progress, Done
• PROJECT_BOARD_BUG_TRIAGE_TYPE: Needs Triage, High Priority, Low Priority, Closed

Issue and pull request attachments (attachment)

• ENABLED: true: Whether issue and pull request attachments are enabled.
• ALLOWED_TYPES: .csv,.docx,.fodg,.fodp,.fods,.fodt,.gif,.gz,.jpeg,.jpg,.log,.md,.mov,.mp4,.odf,.odg,.odp,.ods,.odt,.pdf,.png,.pptx,.svg,.tgz,.txt,.webm,.xls,.xlsx,.zip: Comma-separated list of allowed file extensions (.zip), mime types (text/plain) or wildcard type (image/*, audio/*, video/*). Empty value or */* allows all types.
• MAX_SIZE: 4: Maximum size (MB).
• MAX_FILES: 5: Maximum number of attachments that can be uploaded at once.
• STORAGE_TYPE: local: Storage type for attachments, local for local disk or minio for s3 compatible object storage service, default is local or other name defined with [storage.xxx]
• SERVE_DIRECT: false: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
• PATH: data/attachments: Path to store attachments only available when STORAGE_TYPE is local
• MINIO_ENDPOINT: localhost:9000: Minio endpoint to connect only available when STORAGE_TYPE is minio
• MINIO_ACCESS_KEY_ID: Minio accessKeyID to connect only available when STORAGE_TYPE is minio
• MINIO_SECRET_ACCESS_KEY: Minio secretAccessKey to connect only available when STORAGE_TYPE is minio
• MINIO_BUCKET: gitea: Minio bucket to store the attachments only available when STORAGE_TYPE is minio
• MINIO_LOCATION: us-east-1: Minio location to create bucket only available when STORAGE_TYPE is minio
• MINIO_BASE_PATH: attachments/: Minio base path on the bucket only available when STORAGE_TYPE is minio
• MINIO_USE_SSL: false: Minio enabled ssl only available when STORAGE_TYPE is minio

Log (log)

• ROOT_PATH: <empty>: Root path for log files.
• MODE: console: Logging mode. For multiple modes, use a comma to separate values. You can configure each mode in per mode log subsections \[log.modename\]. By default the file mode will log to $ROOT_PATH/gitea.log.
• LEVEL: Info: General log level. [Trace, Debug, Info, Warn, Error, Critical, Fatal, None]
• STACKTRACE_LEVEL: None: Default log level at which to log create stack traces. [Trace, Debug, Info, Warn, Error, Critical, Fatal, None]
• ENABLE_SSH_LOG: false: save ssh log to log file
• ENABLE_XORM_LOG: true: Set whether to perform XORM logging. Please note SQL statement logging can be disabled by setting LOG_SQL to false in the [database] section.

Router Log (log)

• DISABLE_ROUTER_LOG: false: Mute printing of the router log.
• ROUTER: console: The mode or name of the log the router should log to. (If you set this to , it will log to default Gitea logger.) NB: You must have DISABLE_ROUTER_LOG set to false for this option to take effect. Configure each mode in per mode log subsections \[log.modename.router\].

Access Log (log)

• ENABLE_ACCESS_LOG: false: Creates an access.log in NCSA common log format, or as per the following template
• ACCESS: file: Logging mode for the access logger, use a comma to separate values. Configure each mode in per mode log subsections \[log.modename.access\]. By default the file mode will log to $ROOT_PATH/access.log. (If you set this to , it will log to the default Gitea logger.)
• ACCESS_LOG_TEMPLATE: {{.Ctx.RemoteAddr}} - {{.Identity}} {{.Start.Format "[02/Jan/2006:15:04:05 -0700]" }} "{{.Ctx.Req.Method}} {{.Ctx.Req.URL.RequestURI}} {{.Ctx.Req.Proto}}" {{.ResponseWriter.Status}} {{.ResponseWriter.Size}} "{{.Ctx.Req.Referer}}\" \"{{.Ctx.Req.UserAgent}}": Sets the template used to create the access log.
  • The following variables are available:
  • Ctx: the context.Context of the request.
  • Identity: the SignedUserName or "-" if not logged in.
  • Start: the start time of the request.
  • ResponseWriter: the responseWriter from the request.
  • You must be very careful to ensure that this template does not throw errors or panics as this template runs outside of the panic/recovery script.

Log subsections (log.name, log.name.*)

• LEVEL: log.LEVEL: Sets the log-level of this sublogger. Defaults to the LEVEL set in the global [log] section.
• STACKTRACE_LEVEL: log.STACKTRACE_LEVEL: Sets the log level at which to log stack traces.
• MODE: name: Sets the mode of this sublogger - Defaults to the provided subsection name. This allows you to have two different file loggers at different levels.
• EXPRESSION: "": A regular expression to match either the function name, file or message. Defaults to empty. Only log messages that match the expression will be saved in the logger.
• FLAGS: stdflags: A comma separated string representing the log flags. Defaults to stdflags which represents the prefix: 2009/01/23 01:23:23 ...a/b/c/d.go:23:runtime.Caller() [I]: message. none means don't prefix log lines. See modules/log/flags.go for more information.
• PREFIX: "": An additional prefix for every log line in this logger. Defaults to empty.
• COLORIZE: false: Whether to colorize the log lines

Console log mode (log.console, log.console.*, or MODE=console)

• For the console logger COLORIZE will default to true if not on windows or the terminal is determined to be able to color.
• STDERR: false: Use Stderr instead of Stdout.

File log mode (log.file, log.file.* or MODE=file)

• FILE_NAME: Set the file name for this logger. Defaults as described above. If relative will be relative to the ROOT_PATH
• LOG_ROTATE: true: Rotate the log files.
• MAX_SIZE_SHIFT: 28: Maximum size shift of a single file, 28 represents 256Mb.
• DAILY_ROTATE: true: Rotate logs daily.
• MAX_DAYS: 7: Delete the log file after n days
• COMPRESS: true: Compress old log files by default with gzip
• COMPRESSION_LEVEL: -1: Compression level

Conn log mode (log.conn, log.conn.* or MODE=conn)

• RECONNECT_ON_MSG: false: Reconnect host for every single message.
• RECONNECT: false: Try to reconnect when connection is lost.
• PROTOCOL: tcp: Set the protocol, either "tcp", "unix" or "udp".
• ADDR: :7020: Sets the address to connect to.

SMTP log mode (log.smtp, log.smtp.* or MODE=smtp)

• USER: User email address to send from.
• PASSWD: Password for the smtp server.
• HOST: 127.0.0.1:25: The SMTP host to connect to.
• RECEIVERS: Email addresses to send to.
• SUBJECT: Diagnostic message from Gitea

Cron (cron)

• ENABLED: false: Enable to run all cron tasks periodically with default settings.

• RUN_AT_START: false: Run cron tasks at application start-up.

• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.

• SCHEDULE accept formats

  • Full crontab specs, e.g. * * * * * ?
  • Descriptors, e.g. @midnight, @every 1h30m ...
  • See more: cron documentation

Basic cron tasks - enabled by default

Cron - Cleanup old repository archives (cron.archive_cleanup)

• ENABLED: true: Enable service.
• RUN_AT_START: true: Run tasks at start up time (if ENABLED).
• SCHEDULE: @midnight: Cron syntax for scheduling repository archive cleanup, e.g. @every 1h.
• OLDER_THAN: 24h: Archives created more than OLDER_THAN ago are subject to deletion, e.g. 12h.

Cron - Update Mirrors (cron.update_mirrors)

• SCHEDULE: @every 10m: Cron syntax for scheduling update mirrors, e.g. @every 3h.
• PULL_LIMIT: 50: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling pull mirror updating).
• PUSH_LIMIT: 50: Limit the number of mirrors added to the queue to this number (negative values mean no limit, 0 will result in no mirrors being queued effectively disabling push mirror updating).

Cron - Repository Health Check (cron.repo_health_check)

• SCHEDULE: @midnight: Cron syntax for scheduling repository health check.
• TIMEOUT: 60s: Time duration syntax for health check execution timeout.
• ARGS: <empty>: Arguments for command git fsck, e.g. --unreachable --tags. See more on http://git-scm.com/docs/git-fsck

Cron - Repository Statistics Check (cron.check_repo_stats)

• RUN_AT_START: true: Run repository statistics check at start time.
• SCHEDULE: @midnight: Cron syntax for scheduling repository statistics check.

Cron - Cleanup hook_task Table (cron.cleanup_hook_task_table)

• ENABLED: true: Enable cleanup hook_task job.
• RUN_AT_START: false: Run cleanup hook_task at start time (if ENABLED).
• SCHEDULE: @midnight: Cron syntax for cleaning hook_task table.
• CLEANUP_TYPE OlderThan OlderThan or PerWebhook Method to cleanup hook_task, either by age (i.e. how long ago hook_task record was delivered) or by the number to keep per webhook (i.e. keep most recent x deliveries per webhook).
• OLDER_THAN: 168h: If CLEANUP_TYPE is set to OlderThan, then any delivered hook_task records older than this expression will be deleted.
• NUMBER_TO_KEEP: 10: If CLEANUP_TYPE is set to PerWebhook, this is number of hook_task records to keep for a webhook (i.e. keep the most recent x deliveries).

Cron - Cleanup expired packages (cron.cleanup_packages)

• ENABLED: true: Enable cleanup expired packages job.
• RUN_AT_START: true: Run job at start time (if ENABLED).
• NOTICE_ON_SUCCESS: false: Notify every time this job runs.
• SCHEDULE: @midnight: Cron syntax for the job.
• OLDER_THAN: 24h: Unreferenced package data created more than OLDER_THAN ago is subject to deletion.

Cron - Update Migration Poster ID (cron.update_migration_poster_id)

• SCHEDULE: @midnight : Interval as a duration between each synchronization, it will always attempt synchronization when the instance starts.

Cron - Sync External Users (cron.sync_external_users)

• SCHEDULE: @midnight : Interval as a duration between each synchronization, it will always attempt synchronization when the instance starts.
• UPDATE_EXISTING: true: Create new users, update existing user data and disable users that are not in external source anymore (default) or only create new users if UPDATE_EXISTING is set to false.

Extended cron tasks (not enabled by default)

Cron - Garbage collect all repositories ('cron.git_gc_repos')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• SCHEDULE: @every 72h: Cron syntax for scheduling repository archive cleanup, e.g. @every 1h.
• TIMEOUT: 60s: Time duration syntax for garbage collection execution timeout.
• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.
• ARGS: <empty>: Arguments for command git gc, e.g. --aggressive --auto. The default value is same with [git] -> GC_ARGS

Cron - Update the '.ssh/authorized_keys' file with Gitea SSH keys ('cron.resync_all_sshkeys')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.
• SCHEDULE: @every 72h: Cron syntax for scheduling repository archive cleanup, e.g. @every 1h.

Cron - Resynchronize pre-receive, update and post-receive hooks of all repositories ('cron.resync_all_hooks')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.
• SCHEDULE: @every 72h: Cron syntax for scheduling repository archive cleanup, e.g. @every 1h.

Cron - Reinitialize all missing Git repositories for which records exist ('cron.reinit_missing_repos')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.
• SCHEDULE: @every 72h: Cron syntax for scheduling repository archive cleanup, e.g. @every 1h.

Cron - Delete all repositories missing their Git files ('cron.delete_missing_repos')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.
• SCHEDULE: @every 72h: Cron syntax for scheduling repository archive cleanup, e.g. @every 1h.

Cron - Delete generated repository avatars ('cron.delete_generated_repository_avatars')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.
• SCHEDULE: @every 72h: Cron syntax for scheduling repository archive cleanup, e.g. @every 1h.

Cron - Delete all old actions from database ('cron.delete_old_actions')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• NOTICE_ON_SUCCESS: false: Set to true to switch on success notices.
• SCHEDULE: @every 168h: Cron syntax to set how often to check.
• OLDER_THAN: @every 8760h: any action older than this expression will be deleted from database, suggest using 8760h (1 year) because that's the max length of heatmap.

Cron - Check for new Gitea versions ('cron.update_checker')

• ENABLED: true: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• ENABLE_SUCCESS_NOTICE: true: Set to false to switch off success notices.
• SCHEDULE: @every 168h: Cron syntax for scheduling a work, e.g. @every 168h.
• HTTP_ENDPOINT: https://dl.gitea.io/gitea/version.json: the endpoint that Gitea will check for newer versions

Cron - Delete all old system notices from database ('cron.delete_old_system_notices')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• NO_SUCCESS_NOTICE: false: Set to true to switch off success notices.
• SCHEDULE: @every 168h: Cron syntax to set how often to check.
• OLDER_THAN: @every 8760h: any system notice older than this expression will be deleted from database.

Cron - Garbage collect LFS pointers in repositories ('cron.gc_lfs')

• ENABLED: false: Enable service.
• RUN_AT_START: false: Run tasks at start up time (if ENABLED).
• SCHEDULE: @every 24h: Cron syntax to set how often to check.
• OLDER_THAN: 168h: Only attempt to garbage collect LFSMetaObjects older than this (default 7 days)
• LAST_UPDATED_MORE_THAN_AGO: 72h: Only attempt to garbage collect LFSMetaObjects that have not been attempted to be garbage collected for this long (default 3 days)
• NUMBER_TO_CHECK_PER_REPO: 100: Minimum number of stale LFSMetaObjects to check per repo. Set to 0 to always check all.
• PROPORTION_TO_CHECK_PER_REPO: 0.6: Check at least this proportion of LFSMetaObjects per repo. (This may cause all stale LFSMetaObjects to be checked.)

Git (git)

• PATH: "": The path of Git executable. If empty, Gitea searches through the PATH environment.
• HOME_PATH: %(APP_DATA_PATH)s/home: The HOME directory for Git. This directory will be used to contain the .gitconfig and possible .gnupg directories that Gitea's git calls will use. If you can confirm Gitea is the only application running in this environment, you can set it to the normal home directory for Gitea user.
• DISABLE_DIFF_HIGHLIGHT: false: Disables highlight of added and removed changes.
• MAX_GIT_DIFF_LINES: 1000: Max number of lines allowed of a single file in diff view.
• MAX_GIT_DIFF_LINE_CHARACTERS: 5000: Max character count per line highlighted in diff view.
• MAX_GIT_DIFF_FILES: 100: Max number of files shown in diff view.
• COMMITS_RANGE_SIZE: 50: Set the default commits range size
• BRANCHES_RANGE_SIZE: 20: Set the default branches range size
• GC_ARGS: <empty>: Arguments for command git gc, e.g. --aggressive --auto. See more on http://git-scm.com/docs/git-gc/
• ENABLE_AUTO_GIT_WIRE_PROTOCOL: true: If use Git wire protocol version 2 when Git version >= 2.18, default is true, set to false when you always want Git wire protocol version 1. To enable this for Git over SSH when using a OpenSSH server, add AcceptEnv GIT_PROTOCOL to your sshd_config file.
• PULL_REQUEST_PUSH_MESSAGE: true: Respond to pushes to a non-default branch with a URL for creating a Pull Request (if the repository has them enabled)
• VERBOSE_PUSH: true: Print status information about pushes as they are being processed.
• VERBOSE_PUSH_DELAY: 5s: Only print verbose information if push takes longer than this delay.
• LARGE_OBJECT_THRESHOLD: 1048576: (Go-Git only), don't cache objects greater than this in memory. (Set to 0 to disable.)
• DISABLE_CORE_PROTECT_NTFS: false Set to true to forcibly set core.protectNTFS to false.
• DISABLE_PARTIAL_CLONE: false Disable the usage of using partial clones for git.

Git - Timeout settings (git.timeout)

• DEFAULT: 360: Git operations default timeout seconds.
• MIGRATE: 600: Migrate external repositories timeout seconds.
• MIRROR: 300: Mirror external repositories timeout seconds.
• CLONE: 300: Git clone from internal repositories timeout seconds.
• PULL: 300: Git pull from internal repositories timeout seconds.
• GC: 60: Git repository GC timeout seconds.

Metrics (metrics)

• ENABLED: false: Enables /metrics endpoint for prometheus.
• ENABLED_ISSUE_BY_LABEL: false: Enable issue by label metrics with format gitea_issues_by_label{label="bug"} 2.
• ENABLED_ISSUE_BY_REPOSITORY: false: Enable issue by repository metrics with format gitea_issues_by_repository{repository="org/repo"} 5.
• TOKEN: <empty>: You need to specify the token, if you want to include in the authorization the metrics . The same token need to be used in prometheus parameters bearer_token or bearer_token_file.

API (api)

• ENABLE_SWAGGER: true: Enables the API documentation endpoints (/api/swagger, /api/v1/swagger, …). True or false.
• MAX_RESPONSE_ITEMS: 50: Max number of items in a page.
• DEFAULT_PAGING_NUM: 30: Default paging number of API.
• DEFAULT_GIT_TREES_PER_PAGE: 1000: Default and maximum number of items per page for Git trees API.
• DEFAULT_MAX_BLOB_SIZE: 10485760 (10MiB): Default max size of a blob that can be returned by the blobs API.

OAuth2 (oauth2)

• ENABLE: true: Enables OAuth2 provider.
• ACCESS_TOKEN_EXPIRATION_TIME: 3600: Lifetime of an OAuth2 access token in seconds
• REFRESH_TOKEN_EXPIRATION_TIME: 730: Lifetime of an OAuth2 refresh token in hours
• INVALIDATE_REFRESH_TOKENS: false: Check if refresh token has already been used
• JWT_SIGNING_ALGORITHM: RS256: Algorithm used to sign OAuth2 tokens. Valid values: [HS256, HS384, HS512, RS256, RS384, RS512, ES256, ES384, ES512]
• JWT_SECRET: <empty>: OAuth2 authentication secret for access and refresh tokens, change this to a unique string. This setting is only needed if JWT_SIGNING_ALGORITHM is set to HS256, HS384 or HS512.
• JWT_SIGNING_PRIVATE_KEY_FILE: jwt/private.pem: Private key file path used to sign OAuth2 tokens. The path is relative to APP_DATA_PATH. This setting is only needed if JWT_SIGNING_ALGORITHM is set to RS256, RS384, RS512, ES256, ES384 or ES512. The file must contain a RSA or ECDSA private key in the PKCS8 format. If no key exists a 4096 bit key will be created for you.
• MAX_TOKEN_LENGTH: 32767: Maximum length of token/cookie to accept from OAuth2 provider

i18n (i18n)

• LANGS: en-US,zh-CN,zh-HK,zh-TW,de-DE,fr-FR,nl-NL,lv-LV,ru-RU,uk-UA,ja-JP,es-ES,pt-BR,pt-PT,pl-PL,bg-BG,it-IT,fi-FI,tr-TR,cs-CZ,sv-SE,ko-KR,el-GR,fa-IR,hu-HU,id-ID,ml-IN: List of locales shown in language selector. The first locale will be used as the default if user browser's language doesn't match any locale in the list.
• NAMES: English,简体中文,繁體中文（香港）,繁體中文（台灣）,Deutsch,Français,Nederlands,Latviešu,Русский,Українська,日本語,Español,Português do Brasil,Português de Portugal,Polski,Български,Italiano,Suomi,Türkçe,Čeština,Српски,Svenska,한국어,Ελληνικά,فارسی,Magyar nyelv,Bahasa Indonesia,മലയാളം: Visible names corresponding to the locales

Markup (markup)

• MERMAID_MAX_SOURCE_CHARACTERS: 5000: Set the maximum size of a Mermaid source. (Set to -1 to disable)

Gitea can support Markup using external tools. The example below will add a markup named asciidoc.

[markup.asciidoc]
ENABLED = true
NEED_POSTPROCESS = true
FILE_EXTENSIONS = .adoc,.asciidoc
RENDER_COMMAND = "asciidoc --out-file=- -"
IS_INPUT_FILE = false

• ENABLED: false Enable markup support; set to true to enable this renderer.
• NEED_POSTPROCESS: true set to true to replace links / sha1 and etc.
• FILE_EXTENSIONS: <empty> List of file extensions that should be rendered by an external command. Multiple extensions needs a comma as splitter.
• RENDER_COMMAND: External command to render all matching extensions.
• IS_INPUT_FILE: false Input is not a standard input but a file param followed RENDER_COMMAND.
• RENDER_CONTENT_MODE: sanitized How the content will be rendered.
  • sanitized: Sanitize the content and render it inside current page, default to only allow a few HTML tags and attributes. Customized sanitizer rules can be defined in [markup.sanitizer.*].
  • no-sanitizer: Disable the sanitizer and render the content inside current page. It's insecure and may lead to XSS attack if the content contains malicious code.
  • iframe: Render the content in a separate standalone page and embed it into current page by iframe. The iframe is in sandbox mode with same-origin disabled, and the JS code are safely isolated from parent page.

Two special environment variables are passed to the render command:

• GITEA_PREFIX_SRC, which contains the current URL prefix in the src path tree. To be used as prefix for links.
• GITEA_PREFIX_RAW, which contains the current URL prefix in the raw path tree. To be used as prefix for image paths.

If RENDER_CONTENT_MODE is sanitized, Gitea supports customizing the sanitization policy for rendered HTML. The example below will support KaTeX output from pandoc.

[markup.sanitizer.TeX]
; Pandoc renders TeX segments as <span>s with the "math" class, optionally
; with "inline" or "display" classes depending on context.
ELEMENT = span
ALLOW_ATTR = class
REGEXP = ^\s*((math(\s+|$)|inline(\s+|$)|display(\s+|$)))+
ALLOW_DATA_URI_IMAGES = true

• ELEMENT: The element this policy applies to. Must be non-empty.
• ALLOW_ATTR: The attribute this policy allows. Must be non-empty.
• REGEXP: A regex to match the contents of the attribute against. Must be present but may be empty for unconditional whitelisting of this attribute.
• ALLOW_DATA_URI_IMAGES: false Allow data uri images (<img src="data:image/png;base64,..."/>).

Multiple sanitisation rules can be defined by adding unique subsections, e.g. [markup.sanitizer.TeX-2]. To apply a sanitisation rules only for a specify external renderer they must use the renderer name, e.g. [markup.sanitizer.asciidoc.rule-1]. If the rule is defined above the renderer ini section or the name does not match a renderer it is applied to every renderer.

Highlight Mappings (highlight.mapping)

• file_extension e.g. .toml: language e.g. ini. File extension to language mapping overrides.

• Gitea will highlight files using the linguist-language or gitlab-language attribute from the .gitattributes file if available. If this is not set or the language is unavailable, the file extension will be looked up in this mapping or the filetype using heuristics.

Time (time)

• FORMAT: Time format to display on UI. i.e. RFC1123 or 2006-01-02 15:04:05
• DEFAULT_UI_LOCATION: Default location of time on the UI, so that we can display correct user's time on UI. i.e. Asia/Shanghai

Task (task)

Task queue configuration has been moved to queue.task. However, the below configuration values are kept for backwards compatibility:

• QUEUE_TYPE: channel: Task queue type, could be channel or redis.
• QUEUE_LENGTH: 1000: Task queue length, available only when QUEUE_TYPE is channel.
• QUEUE_CONN_STR: redis://127.0.0.1:6379/0: Task queue connection string, available only when QUEUE_TYPE is redis. If redis needs a password, use redis://123@127.0.0.1:6379/0.

Migrations (migrations)

• MAX_ATTEMPTS: 3: Max attempts per http/https request on migrations.
• RETRY_BACKOFF: 3: Backoff time per http/https request retry (seconds)
• ALLOWED_DOMAINS: <empty>: Domains allowlist for migrating repositories, default is blank. It means everything will be allowed. Multiple domains could be separated by commas. Wildcard is supported: github.com, *.github.com.
• BLOCKED_DOMAINS: <empty>: Domains blocklist for migrating repositories, default is blank. Multiple domains could be separated by commas. When ALLOWED_DOMAINS is not blank, this option has a higher priority to deny domains. Wildcard is supported.
• ALLOW_LOCALNETWORKS: false: Allow private addresses defined by RFC 1918, RFC 1122, RFC 4632 and RFC 4291. If a domain is allowed by ALLOWED_DOMAINS, this option will be ignored.
• SKIP_TLS_VERIFY: false: Allow skip tls verify

Federation (federation)

• ENABLED: false: Enable/Disable federation capabilities
• SHARE_USER_STATISTICS: true: Enable/Disable user statistics for nodeinfo if federation is enabled
• MAX_SIZE: 4: Maximum federation request and response size (MB)

WARNING: Changing the settings below can break federation.

• ALGORITHMS: rsa-sha256, rsa-sha512, ed25519: HTTP signature algorithms
• DIGEST_ALGORITHM: SHA-256: HTTP signature digest algorithm
• GET_HEADERS: (request-target), Date: GET headers for federation requests
• POST_HEADERS: (request-target), Date, Digest: POST headers for federation requests

Packages (packages)

• ENABLED: true: Enable/Disable package registry capabilities
• CHUNKED_UPLOAD_PATH: tmp/package-upload: Path for chunked uploads. Defaults to APP_DATA_PATH + tmp/package-upload
• LIMIT_TOTAL_OWNER_COUNT: -1: Maximum count of package versions a single owner can have (-1 means no limits)
• LIMIT_TOTAL_OWNER_SIZE: -1: Maximum size of packages a single owner can use (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_COMPOSER: -1: Maximum size of a Composer upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_CONAN: -1: Maximum size of a Conan upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_CONTAINER: -1: Maximum size of a Container upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_GENERIC: -1: Maximum size of a Generic upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_HELM: -1: Maximum size of a Helm upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_MAVEN: -1: Maximum size of a Maven upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_NPM: -1: Maximum size of a npm upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_NUGET: -1: Maximum size of a NuGet upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_PUB: -1: Maximum size of a Pub upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_PYPI: -1: Maximum size of a PyPI upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_RUBYGEMS: -1: Maximum size of a RubyGems upload (-1 means no limits, format 1000, 1 MB, 1 GiB)
• LIMIT_SIZE_VAGRANT: -1: Maximum size of a Vagrant upload (-1 means no limits, format 1000, 1 MB, 1 GiB)

Mirror (mirror)

• ENABLED: true: Enables the mirror functionality. Set to false to disable all mirrors. Pre-existing mirrors remain valid but won't be updated; may be converted to regular repo.
• DISABLE_NEW_PULL: false: Disable the creation of new pull mirrors. Pre-existing mirrors remain valid. Will be ignored if mirror.ENABLED is false.
• DISABLE_NEW_PUSH: false: Disable the creation of new push mirrors. Pre-existing mirrors remain valid. Will be ignored if mirror.ENABLED is false.
• DEFAULT_INTERVAL: 8h: Default interval between each check
• MIN_INTERVAL: 10m: Minimum interval for checking. (Must be >1m).

LFS (lfs)

Storage configuration for lfs data. It will be derived from default [storage] or [storage.xxx] when set STORAGE_TYPE to xxx. When derived, the default of PATH is data/lfs and the default of MINIO_BASE_PATH is lfs/.

• STORAGE_TYPE: local: Storage type for lfs, local for local disk or minio for s3 compatible object storage service or other name defined with [storage.xxx]
• SERVE_DIRECT: false: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
• PATH: ./data/lfs: Where to store LFS files, only available when STORAGE_TYPE is local. If not set it fall back to deprecated LFS_CONTENT_PATH value in [server] section.
• MINIO_ENDPOINT: localhost:9000: Minio endpoint to connect only available when STORAGE_TYPE is minio
• MINIO_ACCESS_KEY_ID: Minio accessKeyID to connect only available when STORAGE_TYPE is minio
• MINIO_SECRET_ACCESS_KEY: Minio secretAccessKey to connect only available when STORAGE_TYPE is minio
• MINIO_BUCKET: gitea: Minio bucket to store the lfs only available when STORAGE_TYPE is minio
• MINIO_LOCATION: us-east-1: Minio location to create bucket only available when STORAGE_TYPE is minio
• MINIO_BASE_PATH: lfs/: Minio base path on the bucket only available when STORAGE_TYPE is minio
• MINIO_USE_SSL: false: Minio enabled ssl only available when STORAGE_TYPE is minio

Storage (storage)

Default storage configuration for attachments, lfs, avatars and etc.

• SERVE_DIRECT: false: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
• MINIO_ENDPOINT: localhost:9000: Minio endpoint to connect only available when STORAGE_TYPE is minio
• MINIO_ACCESS_KEY_ID: Minio accessKeyID to connect only available when STORAGE_TYPE is minio
• MINIO_SECRET_ACCESS_KEY: Minio secretAccessKey to connect only available when STORAGE_TYPE is minio
• MINIO_BUCKET: gitea: Minio bucket to store the data only available when STORAGE_TYPE is minio
• MINIO_LOCATION: us-east-1: Minio location to create bucket only available when STORAGE_TYPE is minio
• MINIO_USE_SSL: false: Minio enabled ssl only available when STORAGE_TYPE is minio

And you can also define a customize storage like below:

[storage.my_minio]
STORAGE_TYPE = minio
; Minio endpoint to connect only available when STORAGE_TYPE is `minio`
MINIO_ENDPOINT = localhost:9000
; Minio accessKeyID to connect only available when STORAGE_TYPE is `minio`
MINIO_ACCESS_KEY_ID =
; Minio secretAccessKey to connect only available when STORAGE_TYPE is `minio`
MINIO_SECRET_ACCESS_KEY =
; Minio bucket to store the attachments only available when STORAGE_TYPE is `minio`
MINIO_BUCKET = gitea
; Minio location to create bucket only available when STORAGE_TYPE is `minio`
MINIO_LOCATION = us-east-1
; Minio enabled ssl only available when STORAGE_TYPE is `minio`
MINIO_USE_SSL = false

And used by [attachment], [lfs] and etc. as STORAGE_TYPE.

Repository Archive Storage (storage.repo-archive)

Configuration for repository archive storage. It will inherit from default [storage] or [storage.xxx] when set STORAGE_TYPE to xxx. The default of PATH is data/repo-archive and the default of MINIO_BASE_PATH is repo-archive/.

• STORAGE_TYPE: local: Storage type for repo archive, local for local disk or minio for s3 compatible object storage service or other name defined with [storage.xxx]
• SERVE_DIRECT: false: Allows the storage driver to redirect to authenticated URLs to serve files directly. Currently, only Minio/S3 is supported via signed URLs, local does nothing.
• PATH: ./data/repo-archive: Where to store archive files, only available when STORAGE_TYPE is local.
• MINIO_ENDPOINT: localhost:9000: Minio endpoint to connect only available when STORAGE_TYPE is minio
• MINIO_ACCESS_KEY_ID: Minio accessKeyID to connect only available when STORAGE_TYPE is minio
• MINIO_SECRET_ACCESS_KEY: Minio secretAccessKey to connect only available when STORAGE_TYPE is minio
• MINIO_BUCKET: gitea: Minio bucket to store the lfs only available when STORAGE_TYPE is minio
• MINIO_LOCATION: us-east-1: Minio location to create bucket only available when STORAGE_TYPE is minio
• MINIO_BASE_PATH: repo-archive/: Minio base path on the bucket only available when STORAGE_TYPE is minio
• MINIO_USE_SSL: false: Minio enabled ssl only available when STORAGE_TYPE is minio

Proxy (proxy)

• PROXY_ENABLED: false: Enable the proxy if true, all requests to external via HTTP will be affected, if false, no proxy will be used even environment http_proxy/https_proxy
• PROXY_URL: <empty>: Proxy server URL, support http://, https//, socks://, blank will follow environment http_proxy/https_proxy
• PROXY_HOSTS: <empty>: Comma separated list of host names requiring proxy. Glob patterns (*) are accepted; use ** to match all hosts.

i.e.

PROXY_ENABLED = true
PROXY_URL = socks://127.0.0.1:1080
PROXY_HOSTS = *.github.com

Other (other)

• SHOW_FOOTER_BRANDING: false: Show Gitea branding in the footer.
• SHOW_FOOTER_VERSION: true: Show Gitea and Go version information in the footer.
• SHOW_FOOTER_TEMPLATE_LOAD_TIME: true: Show time of template execution in the footer.
• ENABLE_SITEMAP: true: Generate sitemap.
• ENABLE_FEED: true: Enable/Disable RSS/Atom feed.